NAFTA Insights | KPMG | GLOBAL
close
Share with your friends

NAFTA Insights

NAFTA Insights

August 2018 - Edition 8

1000

Related content

NAFTA Insights

Since the last NAFTA Insights, the Mexican presidential election has occurred and the mid-term elections in the U.S. are fast-approaching. Following a NAFTA negotiations overview from Eurasia Group, this edition of NAFTA Insights reports on the s232 tariffs to date and their implications in the near term.

The latest on negotiations from Eurasia Group

With the victory of president-elect Andrés Manuel López Obrador in Mexico, Eurasia Group believes that policy decisions in Mexico are set to be more politicized, with centralized decision-making that means less influence from ministers and advisors than in the past, and possibly higher uncertainty in the years to come.

López Obrador’s share of vote is the largest a presidential candidate has obtained since elections have been transparent in Mexico. He will begin his presidency in a very strong position politically.

The appointment of the politically experienced Marcelo Ebrard to Foreign Affairs Secretary signals that López Obrador realizes that U.S.-Mexico and other foreign relations will be a priority. On July 2nd, President Trump called López Obrador to congratulate him on his victory. It has been reported that the two discussed projects that boost employment in both countries, reduce migration and improve security conditions – and a bilateral trade agreement, although Eurasia Group believes a bilateral agreement remains unlikely given the incentives for Mexico and Canada to work together.

With a new government in Mexico that will bring new people and a new set of ideas, Eurasia Group believes that NAFTA negotiations will at least be delayed and could get more challenging. While López Obrador remains committed to maintaining NAFTA, he will want to incorporate topics like wages, energy and agriculture into the discussions.

During an interview on July 1st, President Trump said that he wants to wait until after the U.S. midterm elections this November before finalizing a deal on NAFTA. U.S. Trade Representative Robert Lighthizer has also said that parties were aiming to get a deal by the end of August so that the current administration in Mexico can sign it before the new one takes office on December 1st. But Eurasia Group thinks this optimism needs to be taken with caution. There has been a long period without formal negotiations which has not let the talks advance and with no clear signs of real softening on country demands. On July 25th, Canadian and Mexican officials announced their commitment to a trilateral agreement and re-stated their opposition to the proposed "sunset clause".

The U.S. administration is also reported to have considered imposing tariffs on autos. Should such tariffs be imposed, direct retaliation is complicated for Canada and Mexico due to the integration of North American automotive supply chains. However, Eurasia Group believes that the reactions of both Mexico and Canada to the steel and aluminium tariffs already imposed suggests that a response to any auto tariffs is plausible. Eurasia Group believes that the current NAFTA is most likely to survive, but under a cloud of uncertainty; combined with U.S. midterm elections, applying the new s.232 action could further delay the renegotiation of NAFTA beyond 2018 or even 2019.

Trade tensions: s.232 tariffs

NAFTA negotiations have been overshadowed publicly, at least temporarily, by the U.S. government’s decision not to extend the s.232 tariff exemption granted to Mexico, the E.U. and Canada.

Effective June 1st, a wide range of steel and aluminum products became subject to 25% and 10% tariffs respectively. The goods subject to customs duties in the U.S. are classified under the following Harmonized Tariff provisions:

  • Steel: 7206.10 to 7216.50, 7216.99 to 7301.10, 7302.10, 7302.40 to 7306.90, 7304.10 to 7306.90.
  • Aluminum: 7601, 7604 to 7609, 7616.99.51.

Both Canada and Mexico have responded with countermeasures.

Mexico

On June 5th, the Mexican government published in the Federal Official Gazette countermeasures against the customs duties imposed by the United States for failing to comply with NAFTA, which requires the U.S. to notify the other parties involved in a process of imposition of emergency measures, consulting the affected party, offering compensation options, as well as notifying the Free Trade Commission.

These aforementioned measures include:

  • Suspension of NAFTA preferential tariff treatment and application of import duties ranging from 7% to 25% to 71 products from U.S. origin classified in chapters 02, 04, 08, 16, 20, 21, 22, 72, 73, 76, 84, 89 and 94, which include pork, cheese, apples, ham, cranberries, Tennessee or Bourbon whisky, and diverse steel products, among others.
  • The tariff rate will be applicable only in permanent imports including those under the Sectorial Relief Program (PROSEC) and those made in the border region and northern border area.
  • Regarding Immex companies (“maquiladoras” enterprises that perform temporary importations), the retaliation from Mexico will not have a significant impact as long as they continue to import goods under temporary basis. These companies would be affected if they perform permanent imports or when they carry out changes of regime from temporary to permanent importation of goods with US origin. Nevertheless, a case by case analysis should be carried out. 
  • Rise of 15% in the general import duty rate of 186 steel products contained in headings 7208 to 7214, 7216, 7219, 7225 to 7228, and 7304 to 7308 for their importation into Mexico.
  • Addition of different HTS codes from Chapter 72 into Article 5 (raw materials) of the PROSEC on Sectors I “Electric”, IIb “Electronic” and XIX “Automotive and auto parts”: for these HTS codes a total exemption of the import duty is granted for companies that carry out manufacturing activities.

Canada

In response to the section 232 tariffs, Canada imposed $16.6 billion in countermeasures, on a “dollar-for-dollar” basis, on U.S. goods imported into Canada. On May 31st, a proposed list of items to be subjected to a surtax was released, followed by a public consultation period. A final list of impacted products was released on June 29th, 2018.

These countermeasures, which came in to effect July 1st, 2018, impose a 25% surtax on a wide range of steel products, as well as a 10% surtax on a wide range of aluminum products. In addition, the countermeasures included a 10% surtax on a variety of other, mostly consumer, products. These products included yogurt, cucumbers, ketchup, mayonnaise, toilet paper, among other items.

More recently, there has been heightened tension over the potential for the U.S. to impose a 25% tariff on foreign auto imports into the U.S. Representatives from the North American automotive industry have expressed concerns over the potential economic impact due to the interconnectedness of supply chains on both sides of the border. Further, with 85% of Canadian-made vehicles and auto parts being exported to the U.S., Canadian officials have warned that any imposition of tariffs on Canadian automotive imports to the U.S. would be met with proportional countermeasures. Canada may not be alone in taking action to combat these potential tariffs, as Canada and South Korea have reportedly agreed to show a united front in an attempt to defend their respective auto industries. In all, potential auto tariffs, in addition to the current countermeasures being undertaken, have heightened tensions, further complicating ongoing NAFTA negotiations.

Where to next?

Despite the imposition of countermeasures, the governments of the U.S., Canada and Mexico have restated their commitments to re-negotiating NAFTA. Although no formal Round 8 is scheduled, talks have been ongoing among the three countries.

A NAFTA “sunset clause” has been requested by the U.S. Such a clause would effectively put an expiry date on NAFTA every 5 years if all parties do not agree to re-sign. The intention of the clause is said to be to encourage the three countries to make updates and modifications on a regular basis. Canadian Prime Minister Trudeau has been quoted as saying that a sunset clause is “unacceptable to Canada”.

Other points of continued contention include automotive rules of origin, Chapter 19 dispute settlement, Canada’s supply management program, and government procurement.

Actions to consider

  • Continue to model the overall impact, including any impact from U.S. additional tariffs and countermeasures. Analyzing supply chain and mitigating any labor disruptions should remain a top priority for businesses engaged in cross-border trade. 
  • Companies should understand how a termination of, or substantial change to, NAFTA will affect them. It is clear that, as a general matter, a termination of NAFTA would likely cause tariff rates to revert to Most Favoured Nation (“MFN”) rates. Companies are also advised to review and understand the risks associated with their current-state importing activity. 
  • This should also encompass any U.S. Tax Reform planning that impacts the supply chain. Both U.S. and non-U.S. multinationals are in the midst of evaluating the impact of U.S. Tax Reform on various intercompany and third party relationships that in some cases will change the location of certain manufacturing and processing activities. Such planning cannot be done in a vacuum and it is possible that scenario planning for changes in trade matters will trigger a different long-term conclusion.
  • Assess the impact on Transfer Pricing and Customs Value. The importer of record generally bears initial responsibility for an increase in tariffs, which ultimately become part of the importer’s COGS. Those costs are generally allocated among related parties, provided such allocation is at arm’s length. The tariff treatment, however, could raise a number of considerations including comparability (e.g. if a tested party is exposed to NAFTA and comparable companies are not), acceptable arm’s length range for tax purposes (e.g. an increase in COGS would decrease the operating margin of the importer of record, which could necessitate a transfer price adjustment), and the impact of a transfer price adjustment on the customs value (e.g. an increase to the transfer price may increase the customs value, resulting in additional duties owed).
  • Look for savings opportunities. In order to dampen the potential impact of negative changes to NAFTA, companies should consider various savings opportunities. For example, the U.S. companies are able to reduce their duty spend using First Sale for Export, defer duty with a Foreign Trade Zone, and reduce manual efforts (and long-term costs) through automation of many aspects of trade compliance.
  • Furthermore, taking advantage of other Free Trade Agreements could help mitigate costs should there be any substantial transformation to NAFTA. For example, Canada currently has 13 FTAs in force, and has ratified a new FTA with Europe (CETA) in September 2017. As well, both Canada and Mexico are signatories on the new Comprehensive and Progressive Trans-Pacific Partnership (CPTPP). These FTAs provide Canada and Mexico with the opportunity to look outside of NAFTA for both imports and exports.

 

As always, please reach out to us any questions, queries or opportunities: GO-FM Geopolitics.

© 2018 KPMG LLP, a Canada limited liability partnership and a member firm of the KPMG network of independent member firms affiliated with KPMG International Cooperative (“KPMG International”), a Swiss entity. All rights reserved.

Connect with us

 

Request for proposal

 

Submit